Hubris Ltd. Leading Supplier Hotel Guest Amenities in Ireland including Hand Driers Hair Driers Hotel Products, Fragance Machines & Water Management Systems
Terms & Conditions
Home About Us Contact Us
Hand Driers
Professional Hand Drier
Sweeper
Dyson
Mediclinics
Air Dri
Hair Driers
Hotel Products
Oil Lamps
Fragance Machines
Water Management Systems
Hubris Limited
70 Malahide Road
Dublin 3
Tel: 01-8530067
Fax: 01-8530070

E: hubris@eircom.net

Mediclinics

 

MachFlow
STAINLESS TEEL AISI 304 SATIN

Air Charm

Download Product Details

General Description

• Warm air hand dryer.
• Sensor operated.
• Maximum power and airflow.
• High speed motor, 325 Km/h
• Maximum robustness and vandal-proof.
• Suitable for very high traffic facilities.
• It normally goes along with a soap dispenser.

Components & Materials
• Stainless steel AISI 304 one-piece cover satin finish, 1,5 mm thick.
• Base in ABS-PC for wall mounting. It includes silent-blocks to damp mechanical vibrations.
• Soft starting motor running that increases the life cycle of this dryer.
• Vacuum universal brush motor, 19000-30000 rpm, F class. RPM
may be manually adjusted.
• Adjustable air speed.
• Heating element free.
• Low power consumption. Automatic disconnection system after 60
seconds of continuous use.
• Two distances (5/25 cm) IR electronic detection sensor.

 
Mediflow® Basic
M03A - Hand dryer Mediflow basic steel white epoxy
Air Charm

General Description

  • Warm air hand dryer.
  • Sensor operated.
  • Maximum power and airflow.
  • Maximum robustness and vandal-proof.
  • Suitable for very high traffic facilities.
  • Recessed kit that conforms to ADAAG projection also available.
  • It normally goes along with a soap dispenser.

Components and Materials

  • Steel one-piece high quality and high impact cover white epoxy coated, 1,9 mm thick. Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Mediflow ® wrench.
  • Fire resistant plastic UL 94-V0 base and fan scroll, with 4 Ø 8 mm holes for wall mounting. It includes silent-blocks to damp mechanical vibrations.
  • Universal brush motor, 4.500 rpm, F class, includes a self-resetable thermal cut-off at 120 ºC.
  • Aluminium centrifugal double asymmetrical inlet fan wheel.
  • Fe, Al & Cr taped wire heating element mounted on a mica frame that incorporates a self-resetable thermal cut-off at 80 ºC.
  • Two distances (15/25 cm) IR electronic detection sensor with polycarbonate viewing window.

Download Product Datasheet here

M03AC - Hand dryer Mediflow basic stainless steel AISI 304 bright finish
M03AC - Hand dryer Mediflow basic stainless steel AISI 304 bright finish

General Description

  • Warm air hand dryer.
  • Sensor operated.
  • Maximum power and airflow.
  • Maximum robustness and vandal-proof.
  • Suitable for very high traffic facilities.
  • Recessed kit that conforms to ADAAG projection also available.
  • It normally goes along with a soap dispenser.

Components and Materials

  • Stainless steel AISI 304 one-piece high quality and high impact cover, bright finish, 1,5 mm thick. Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Mediflow ® wrench.
  • Fire resistant plastic UL 94-V0 base and fan scroll, with 4 Ø 8 mm holes for wall mounting.
  • It includes silent-blocks to damp mechanical vibrations.
  • Universal brush motor, 4.500 rpm, F class, includes a self-resetable thermal cut-off at 120 ºC.
  • Aluminium centrifugal double asymmetrical inlet fan wheel.
  • Fe, Al & Cr taped wire heating element mounted on a mica frame that incorporates a self-resetable thermal cut-off at 80 ºC.
  • Two distances (15/25 cm) IR electronic detection sensor with polycarbonate viewing window.

Download Product Datasheet here

M03ACS - Hand dryer Mediflow basic stainless steel AISI 304 satin finish
M03ACS - Hand dryer Mediflow basic stainless steel AISI 304 satin finish

General Description

  • Warm air hand dryer.
  • Sensor operated.
  • Maximum power and airflow.
  • Maximum robustness and vandal-proof.
  • Suitable for very high traffic facilities.
  • Recessed kit that conforms to ADAAG projection also available.
  • It normally goes along with a soap dispenser.

Components and Materials

  • Stainless steel AISI 304 one-piece high quality and high impact cover, satin finish, 1,5 mm thick. Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Mediflow ® wrench.
  • Fire resistant plastic UL 94-V0 base and fan scroll, with 4 Ø 8 mm holes for wall mounting.
  • It includes silent-blocks to damp mechanical vibrations.
  • Universal brush motor, 4.500 rpm, F class, includes a self-resetable thermal cut-off at 120 ºC.
  • Aluminium centrifugal double asymmetrical inlet fan wheel.
  • Fe, Al & Cr taped wire heating element mounted on a mica frame that incorporates a self-resetable thermal cut-off at 80 ºC.
  • Two distances (15/25 cm) IR electronic detection sensor with polycarbonate viewing window.

Download Product Datasheet here

Speedflow®
M06AF - Hand dryer speedflow® sensor operated white enamelled coating
M06AF - Hand dryer speedflow® sensor operated white enamelled coating
  • Hand dryer, cast iron, 4 mm thick.
  • White enammelled coated.
  • Sensor operated.
  • Total power: 1.150 W.
  • Size: 294 x 270.5 x 100 mm (11-5/8” x 10-5/8” x 4”).

Download Product Datasheet here

 M06A - Hand dryer speedflow® sensor operated white epoxy
M06A - Hand dryer speedflow® sensor operated white epoxy
  • Hand dryer, steel, 1.5 mm thick.
  • White epoxy coated.
  • Sensor operated.
  • Total power: 1.150 W
  • Size: 289 x 266.8 x 100 mm (11-1/2” x 10-1/2” x 4”).

Download Product Datasheet here

M06AC - Hand dryer speedflow® sensor operated stainless steel AISI 304, bright finish
M06AC - Hand dryer speedflow® sensor operated stainless steel AISI 304, bright finish
  • Hand dryer, stainless steel AISI, 1.5 mm thick.
  • Bright finish.
  • Sensor operated.
  • Total power: 1.150 W
  • Size: 289 x 266.8 x 100 mm (11-1/2” x 10-1/2” x 4”).

Download Product Datasheet here

M06ACS - Hand dryer speedflow® sensor operated stainless steel AISI 304, satin finish
M06ACS - Hand dryer speedflow® sensor operated stainless steel AISI 304, satin finish
  • Hand dryer, stainless steel AISI, 1.5 mm thick.
  • Satin finish.
  • Sensor operated.
  • Total power: 1.150 W
  • Size: 289 x 266.8 x 100 mm (11-1/2” x 10-1/2” x 4”).

Download Product Datasheet here

Smartflow®
M04A - Hand dryer Smartflow sensor operated white ABS
M04A - Hand dryer Smartflow sensor operated white ABS
  • Hand dryer, ABS cover, 3 mm (1/8”) thick.
  • White finish.
  • Sensor operated.
  • Total power: 1.100 W.
  • Size: 258 x 145 x 138 mm (10-3/16” x 5-11/16” x 5-3/8”).

Download Product Datasheet here

 

M04AC - Hand dryer Smartflow sensor operated bright finish ABS
M04AC - Hand dryer Smartflow sensor operated bright finish ABS
  • Hand dryer, ABS cover, 3 mm (1/8”) thick.
  • Bright chromed.
  • Sensor operated.
  • Total power: 1.100 W.
  • Size: 258 x 145 x 138 mm (10-3/16” x 5-11/16” x 5-3/8”).


Download Product Datasheet here

M04ACS - Smartflow sensor operated satin finish ABS
  • Hand dryer, ABS cover, 3 mm (1/8”) thick.
  • Satin chromed.
  • Sensor operated.
  • Total power: 1.100 W.
  • Size: 258 x 145 x 138 mm (10-3/16” x 5-11/16” x 5-3/8”).

Download Product Datasheet here


Dualflow
M08A - Hand dryer Dualflow automatic operated
M08A - Hand dryer Dualflow automatic operated
  • Hand dryer, ABS cover, 3 mm thick.
  • White finish.
  • Automatic operated. Infrared sensor
  • Total power: 1.760 W.
  • Size: 617 x 300 x 195 mm

Download Product Datasheet here

M08AC - Hand dryer Dualflow automatic operated
M08AC - Hand dryer Dualflow automatic operated
  • Hand dryer, ABS cover, 3 mm thick.
  • Bright finish.
  • Automatic operated. Infrared sensor
  • Total power: 1.760 W.
  • Size: 617 x 300 x 195 mm

Download Product Datasheet here

M08ACS - Hand dryer Dualflow automatic operated
  • Hand dryer, ABS cover, 3 mm thick.
  • Satin finish.
  • Automatic operated. Infrared sensor
  • Total power: 1.760 W.
  • Size: 617 x 300 x 195 mm

Download Product Datasheet here

   
   
Machflow
MACHFLOW STAINLESS TEEL AISI 304 Bright

General Description

  • Warm air hand dryer.
  • Sensor operated.
  • Maximum power and airflow.
  • High speed motor, 325 Km/h
  • Maximum robustness and vandal-proof.
  • Suitable for very high traffic facilities.
  • It normally goes along with a soap dispenser.

Download Product Datasheet here

MACHFLOW STAINLESS TEEL AISI 304 SATIN

General Description

  • Warm air hand dryer.
  • Sensor operated.
  • Maximum power and airflow.
  • High speed motor, 325 Km/h
  • Maximum robustness and vandal-proof.
  • Suitable for very high traffic facilities.
  • It normally goes along with a soap dispenser.

Download Product Datasheet here

Saniflow® push button operated
E05C Saniflow push-button operated stainless steel AISI 304 bright finish
E05C Saniflow push-button operated stainless steel AISI 304 bright finish
  • Stainless steel cover, 1,5 mm (5/64”) thick.
  • Bright finish.
  • Push button operated. Timer 35”.
  • Total power: 2250 W.
  • Size: 245 x 276 x 210 mm (9-5/8” x 10-7/8” x 8-1/4”).

Download Product Datasheet here

E05CS Saniflow push-button operated stainless steel AISI 304 satin finish
E05CS Saniflow push-button operated stainless steel AISI 304 satin finish
  • Stainless steel cover, 1,5 mm (5/64”) thick.
  • Satin finish.
  • Push button operated. Timer 35”.
  • Total power: 2250 W.
  • Size: 245 x 276 x 210 mm (9-5/8” x 10-7/8” x 8-1/4”).

Download Product Datasheet here

E05 Saniflow push-button operated white epoxy finish
E05 Saniflow push-button operated white epoxy finish
  • Steel cover, 1,5 mm (5/64”) thick.
  • White epoxy coated.
  • Push button operated. Timer 35”.
  • Total power: 2250 W.
  • Size: 245 x 276 x 210 mm (9-5/8” x 10-7/8” x 8-1/4”).

Download Product Datasheet here

E85 Saniflow push-button operated cast iron cover
E85 Saniflow push-button operated cast iron cover
  • Hand dryer, cast iron cover, 6 mm (1/4”) thick.
  • White porcelain enamelled coating.
  • Push button operated. Timer 34”.
  • Total power: 2250 W.
  • Size: 255 x 282 x 215 mm (10” x 11-1/8” x 8-1/2”).

Download Product Datasheet here

E88 - Hand dryer | Saniflow push-button operated white porcelain enamelled coating
E88 - Hand dryer | Saniflow push-button operated white porcelain enamelled coating
  • Steel one-piece cover, 1,5 mm (5/64”) thick.
  • White porcelain enamelled coating.
  • Push button operated. Timer 34”.
  • Total power: 2250 W.
  • Size: 248 x 278 x 210 mm (9-3/4” x 11” x 8-1/4”).


Download Product Datasheet here

E88CS - Hand dryer Saniflow push-button operated chromed satin finish
E88CS - Hand dryer Saniflow push-button operated chromed satin finish
  • Hand dryer, metal sheet cover, 1,5 mm (5/64”) thick.
  • Satin finish.
  • Push button operated. Timer 34”.
  • Total power: 2250 W.
  • Size: 248 x 278 x 210 mm (9-3/4” x 11-1/8” x 8-1/2”).


Download Product Datasheet here

E88O - Hand dryer Saniflow push-button operated chromed gold finish
E88O - Hand dryer Saniflow push-button operated chromed gold finish
  • Hand dryer, metal sheet cover, 1,5 mm (5/64”) thick.
  • Golden finish.
  • Push button operated. Timer 34”.
  • Total power: 2250 W.
  • Size: 248 x 278 x 210 mm (9-3/4” x 11-1/8” x 8-1/2”).

Download Product Datasheet here

Saniflow® sensor operated
E88A - Hand dryer Saniflow sensor operated white enamelled coating
E88A - Hand dryer Saniflow sensor operated white enamelled coating
  • Hand dryer, metal sheet cover, 1,5 mm (5/64”) thick.
  • White porcelain enamelled coating.
  • Sensor operated.
  • Total power: 2250 W.
  • Size: 248 x 278 x 210 mm (9-3/4” x 11-1/8” x 8-1/2”).

Download Product Datasheet here

E88ACS - Hand dryer Saniflow sensor operated chromed satin finish
E88ACS - Hand dryer Saniflow sensor operated chromed satin finish
  • Hand dryer, metal sheet cover, 1,5 mm (5/64”) thick.
  • Bright finish.
  • Sensor operated.
  • Total power: 2250 W.
  • Size: 248 x 278 x 210 mm (9-3/4” x 11-1/8” x 8-1/2”).

Download Product Datasheet here

E05A - Hand dryer Saniflow sensor operated white epoxy finish
E05A - Hand dryer Saniflow sensor operated white epoxy finish

  • Hand dryer, steel cover, 1,5 mm thick.
  • White epoxy coated.
  • Sensor operated.
  • Total power: 2250 W.
  • Size: 245 x 276 x 210 mm (9-5/8” x 10-7/8” x 8-1/4”).

Download Product Datasheet here

 

E88ACS - Hand dryer Saniflow sensor operated chromed satin finish
E88ACS - Hand dryer Saniflow sensor operated chromed satin finish
  • Hand dryer, metal sheet cover, 1,5 mm (5/64”) thick.
  • Satin finish.
  • Sensor operated.
  • Total power: 2250 W.
  • Size: 248 x 278 x 210 mm (9-3/4” x 11-1/8” x 8-1/2”).

Download Product Datasheet here

E05ACS - Hand dryer Saniflow sensor operated stainless steel AISI 304 satin finish
E05ACS - Hand dryer Saniflow sensor operated stainless steel AISI 304 satin finish
  • Hand dryer, stainless steel cover, 1,5 mm (5/64”) thick.
  • Satin finish.
  • Sensor operated.
  • Total power: 2250 W.
  • Size: 245 x 276 x 210 mm (9-5/8” x 10-7/8” x 8-1/4”).

Download Product Datasheet here

E05AC - Hand dryer Saniflow sensor operated stainless steel AISI 304 bright finish
E05AC - Hand dryer Saniflow sensor operated stainless steel AISI 304 bright finish
  • Hand dryer, stainless steel cover, 1,9 mm (1/16”) thick.
  • Bright finish.
  • Sensor operated.
  • Total power: 2250 W.
  • Size: 245 x 276 x 210 mm (9-5/8” x 10-7/8” x 8-1/4”).

Download Product Datasheet here

E88AO - Hand dryer Saniflow sensor operated chromed gold finish
E88AO - Hand dryer Saniflow sensor operated chromed gold finish
  • Hand dryer, metal sheet cover, 1,5 mm (5/64”) thick.
  • Golden finish.
  • Sensor operated.
  • Total power: 2.250 W.
  • Size: 248 x 278 x 210 mm (9-3/4” x 11-1/8” x 8-1/2”).

Download Product Datasheet here

E85A - Hand dryer Saniflow sensor operated cast iron cover
E85A - Hand dryer Saniflow sensor operated cast iron cover
  • Hand dryer, cast iron cover, 6 mm (1/4”) thick.
  • White porcelain enamelled coating.
  • Sensor operated.
  • Total power: 2250 W.
  • Size: 255 x 282 x 215 mm (10” x 11-1/8” x 8-1/2”).

Download Product Datasheet here


 
M99A - Hand dryer Optima sensor operated white epoxy finish
M99A - Hand dryer Optima sensor operated white epoxy finish
  • Hand dryer, steel cover, 1,5 mm (5/64”) thick.
  • White epoxy coated.
  • Sensor operated.
  • Total power: 1.640 W.
  • Size: 302 x 260 x 150 mm (11-7/8” x 10-1/6” x 5-1/2”).

Download Product Datasheet here

M99AC - Optima sensor operated stainless steel AISI 304 bright finish
M99AC - Optima sensor operated stainless steel AISI 304 bright finish
  • Hand dryer, stainless steel cover, 1,5 mm (1/16”) thick.
  • Bright finish.
  • Sensor operated.
  • Total power: 1.640 W.
  • Size: 302 x 260 x 150 mm (11-7/8” x 10-1/6” x 5-1/2”).


Download Product Datasheet here

M99AC - Optima sensor operated stainless steel AISI 304 bright finish
M99AC - Optima sensor operated stainless steel AISI 304 bright finish
  • Hand dryer, stainless steel cover, 1,5 mm (1/16”) thick.
  • Bright finish.
  • Sensor operated.
  • Total power: 1.640 W.
  • Size: 302 x 260 x 150 mm (11-7/8” x 10-1/6” x 5-1/2”).


Download Product Datasheet here

M99ACS - Hand dryer Optima sensor operated stainless steel AISI 304 satin finish
M99ACS - Hand dryer Optima sensor operated stainless steel AISI 304 satin finish
  • Hand dryer, stainless steel cover, 1,5 mm (1/16”) thick.
  • Satin finish.
  • Sensor operated.
  • Total power: 1.640 W.
  • Size: 302 x 260 x 150 mm (11-7/8” x 10-1/6” x 5-1/2”).


Download Product Datasheet here